Most people hire a professional to install a split system air conditioner. However, if you have some experience with plumbing and electrical work, you can install the unit on your own. Each split system or ductless air conditioner is unique to its manufacturer, but this article explains the general instructions for installing a split system air conditioner.
1. Choose the best place to install the outdoor unit.
-The outdoor unit’s location needs to be away from any heavily trafficked, dusty or hot areas.
-The outdoor unit needs 12" of space surrounding its perimeter to ensure proper functioning.
2. Lay the concrete pad on the ground and make sure that it is level.
The pad should be high enough so that the condenser will sit above the level of winter snows.
- Set the outdoor condenser on top of the pad. Use rubber cushioning under the unit's feet to minimize vibration.
- Make sure that no antenna of a radio or television is within 10 feet (3 meters) of the outdoor condenser.
3. Connect the electrical wires.
- Remove the cover.
- Refer to the unit’s wiring diagram and make sure the cable wires are connected as the diagram suggests. Following the manufacturer's instructions for wiring is crucial.
- Fasten the cables with a cable clamp and replace the cover.
4. Secure the pipes’ flare nuts to the corresponding pipes on the outdoor unit.
No comments:
Post a Comment